Home
Home
Home
Home
Contact UslocationsCareers
loading content

FPS 95882535 25FTBT3C4 BT4 Booster Pump, 3hp, 1 in NPT Inlet 1 in NPT Outlet, 230 VAC, Single Phase, Stainless Steel, Horizontal Mount

Part #143125

MFG #95882535

143125_1287_FPS_95882535.jpg

FPS 95882535 25FTBT3C4 BT4 Booster Pump, 3hp, 1 in NPT Inlet 1 in NPT Outlet, 230 VAC, Single Phase, Stainless Steel, Horizontal Mount

Part #143125

MFG #95882535

Sign In to See Your Price

FPS 95882535 25FTBT3C4 BT4 Booster Pump, 3hp, 1 in NPT Inlet 1 in NPT Outlet, 230 VAC, Single Phase, Stainless Steel, Horizontal Mount

Part #143125

MFG #95882535

Item Features
  • Stainless steel discharge head on all models.

  • Cast iron motor bracket with a rugged support foot for horizontal or vertical mounting and a handle for portability of the unit.

  • 1 in suction and 1 in discharge are the same across the entire line, simplifying installation and maintenance.

  • Assembled with the highest quality materials of construction, such as Acetal for impellers,.

  • Modified PPO for the diffusers and 300 series stainless steel for the hub, eye seals, shaft, and shell.

  • Easily serviced through a back pull-out design, which leaves all plumbing and the pump undisturbed in their original location.

  • Industry proven square flange motors.

  • Single-phase, 1/2 through 2 hp motors are dual voltage, set to run with either 115 V or 230 V incoming power, while 3 hp are 230 V only.

  • Shut-off pressures up to 270 psi, flow rates from 5 to 25 gpm, and temperatures up to 120 deg F / 49 deg C.

  • Enhanced hydraulics for 35 and 45 GPM nominal ratings to deliver more efficient pressure boosting.

  • Robust stainless steel bracket, shell anddischarge provide optimum corrosion protection.

  • Equipped with 1.5 in NPT connections at inlet and outlet minimize system friction loss.

  • Versatile bracket can be rotated in 90 deg increments for simplified, compact plumbing arrangements.

  • Multiple bracket drain andpressure tappings enable draining in any position and provide for bypass and accessory plumbing.

  • Back pull-out design enables motor removal for servicing without disturbing either the pump or plumbing.

  • Pump ends (less motors) available to fit an existing 56C motor.

  • Carbon-ceramic-FKM mechanical seal is capable of handling a variety of fluids.

  • Maximum discharge pressure 400 PSI.

  • Maximum fluid handling temperature 120 deg F (49 deg C).