loading content
MASTERS PVC500-C Medium Body Fast Set Cement, 473 mL Container, Clear, For Use With On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Part #197438
MFG #PVC500-C
MASTERS PVC500-C Medium Body Fast Set Cement, 473 mL Container, Clear, For Use With On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Part #197438
MFG #PVC500-C
Sign In to See Your Price
MASTERS PVC500-C Medium Body Fast Set Cement, 473 mL Container, Clear, For Use With On all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Part #197438
MFG #PVC500-C
- Attributes
- Item Features
- Documents
Attributes
TypeMedium Body Fast Set
ColorClear
CompositionTetrahydrofuran/Methyl Ethyl Ketone/Cyclohexanone/Acetone/Polyvinyl Chloride/Silica Amorphous/Fumed/Crystalline free
Container Size473 mL
Suitable For Use WithOn all schedules and classes of PVC pipe and fittings up to 6 in dia with interference fit
Temperature Rating40 to 110 deg F
Odor/ScentSolvent
Item Features
- Cut pipe ends square chamfer and clean pipe ends.
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug.
- Use a suitable applicator at least 1/2 the size of the pipe diameter.
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires.
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface.
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement.
- Apply a second coat of cement to the pipe.
- Assemble parts quickly as cement must be in a fluid state when joining.
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms.
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures.
- Wipe off excess cement for a clean esthetic appearance.
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping.