loading content
Bell & Gossett 401536 Angle Thermostatic Steam Trap, 1/2 in, NPT, 25 psi, Brass
Part #14404
MFG #401536
Bell & Gossett 401536 Angle Thermostatic Steam Trap, 1/2 in, NPT, 25 psi, Brass
Part #14404
MFG #401536
Sign In to See Your Price
Bell & Gossett 401536 Angle Thermostatic Steam Trap, 1/2 in, NPT, 25 psi, Brass
Part #14404
MFG #401536
- Attributes
- Item Features
- Documents
Attributes
TypeAngle
End StyleNPT
MaterialBrass
Nominal Size1/2 in
Pressure Rating25 psi
Item Features
- Thermostatic traps are normally open allowing fast venting of air during start-up.
- During start-up, cold condensate drains through the trap, as temperatures reach 10 to 30 deg F of saturation, the thermostatic bellows element closes the trap.
- During operation, thermostatic traps find an equilibrium point to drain condensate approximately 10 deg to 30 deg F below saturation at continuous flow.
- Sub-cools condensate usually 10 deg to 30 deg F.
- Normally open at start-up to provide fast air venting.
- Follows steam saturation curve to operate over wide range of conditions.
- Self-draining.
- Energy efficient.
- Fast response to changing conditions.
- Fail mode is open.
- Water hammer can damage bellows.
- Superheat can damage bellows if it exceeds trap temperature rating.
- Cooling leg required in some applications.
- Brass bodies provide resistance to moderate water hammer and chemical attack.
- Stainless steel Dura-Stata modules are easily replaced without disturbing piping connections.
- Compact size reduces installation space requirements.
- Inexpensive purchase price.
- Range of seat pressures available up to 125 psig.
- Balanced pressure.
- Model 17C-A 2-25.