loading content
Hach D3422C3 Conductivity Sensors, -20 to 200 deg C, ± 2 %
Part #144394
MFG #D3422C3
Hach D3422C3 Conductivity Sensors, -20 to 200 deg C, ± 2 %
Part #144394
MFG #D3422C3
Sign In to See Your Price
Hach D3422C3 Conductivity Sensors, -20 to 200 deg C, ± 2 %
Part #144394
MFG #D3422C3
- Attributes
- Item Features
- Documents
Attributes
Cable Length6 m
Temperature Rating-20 to 200 deg C
Conductivity Accuracy± 2 %
Item Features
- Ultimate accuracy from ultra-pure to high conductivity applications..
- Nominal Cell Constant (K) = 1.0, 3/4 inch NPT PVDF Compression Fitting, 7m (23 ft) Digital Cable, Titanium Electrode.
- High Performance DesignThese enhanced performance sensors are manufactured to exacting tolerances using high quality, rugged materials for demanding applications including ultra-pure water, clean-in-place (CIP), and boiler/condensate monitoring. Each sensor is tested to determine its unique, absolute four-digit cell constant. Simply key in this constant (Hachs easy DRY-CAL method) when configuring the analyzer to ensure the highest possible measuring accuracy. Also, each sensor has a Pt 1000 RTD temperature element built into its tip for exceptionally fast response to changes in temperature with ±0.1 deg C accuracy..
- Resistivity and Conductivity Measurement CapabilityThese enhanced performance sensors measure from theoretically pure water (0.057 µS/cm or 18.2 mOhm) up to 200,000 µS/cm. Hachs sc Digital Controllers accept multiple digital sensor inputs, and can be user-set to measure conductivity, resistivity,TDS, salinity, or one of six calculated measurements..
- Versatile Mounting StylesCompression fitting sensors-Feature titanium electrodes and a compression fitting for universal installation with up to 4 inches (102 mm) insertion depth. The 1/2-inch or 3/4-inch male NPT compression fittings are offered in PVDF or 316 stainless steel. A longer version of this sensor is available for use with a 316 stainless steel ball valve hardware assembly to insert/retract the sensor from the process without stopping the flow. The longer version can also be used for insertion through a compression fitting. Maximum insertion depth is 7 inches (178 mm)..
- Full Featured Plug and Play Hach sc Digital Controller There are no complicated wiring or set up procedures with any Hach sc controller. Just plug in any combination of Hach digital sensors and its ready to use-its plug and play..
- Integral Digital Gateway.
- 0 - 3 m/s (0-10 ft./s), maximum, fully immersed Flow.
- 3/4 in NPT Installation Kit.
- 0 - 300 psi (20.7 BAR) Pressure Range.
- 0 to 2000 µS/cm Range.
- ± 0.5 of reading Repeatability.
- 90 % of reading within 30 seconds of step change Response Time.